www.SSTAutomation.com
6
2.3 DIP Switch
The DIP switch is used to set operating mode of the device.
Off
On 1 2
Mode (Bit 1)
Function (Bit 2)
Description
Off
Reserved
Running mode, prohibits reading
and writing configuration data
On
Off
Configuration mode, with fixed IP
address 192.168.0.10, only can
read and write configuration data
On
On
BootLoader mode, with fixed IP
address 192.168.0.10
Note:
After changing the switch, please restart the GT200-EI-CO to apply the settings.
2.4 Interface
2.4.1 Power Interface
GND
NC
24V+
1
2
3
Pin
Function
1
Power ground
2
NC(Not Connected)
3
+24V DC
