SST Automation GS11-MT, Руководство пользователя

Страница: 39 / 58

www.sstcomm.com
39
Response Timeout-----The maximum time between the beginning of sending requests by the UART and
receiving response completely, and the range is 10ms~60000ms.
Delay between Polls-----The minimum time between receiving response completely from the UART and
sending the next request, and the range is 0ms~60000ms.
In “SST Automation-defined protocol” mode, you need to set “Input Data Bytes”, “Output Data Bytes” and
“Unit ID”.
Input Data Bytes, Output Data Bytes----- Set input buffer’s size and output data buffer’s size, and each data
buffer's range is 0 bytes~256bytes.
Unit ID-----The device address of Modbus TCP slave, and it could be ignored.
8.4 Configuration
Click “Configuration” button, or double click the selected item in the right table, a password dialog box will
pop up if the equipment has been set up with a password; The Configuration window will appear when your
entering password is correct.