SSS Siedle ProSpec HD101 Скачать руководство пользователя страница 4

 

4

 - FORM NO. 56091054 - ProSpec HD101 / HD101DC

120VAC GROUNDING INSTRUCTIONS

This appliance must be grounded. If it should electrically malfunction, grounding provides a path of least resistance for electric current to reduce 
the risk of electric shock. This appliance is equipped with a cord having an equipment-grounding conductor and grounding plug. The plug must be 
plugged into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances.

 DANGER! 

Improper connection of the equipment-grounding conductor can result in a risk of electric shock. Check with a quali

fi

 ed electrician or 

service person if you are in doubt as to whether the outlet is properly grounded. Do not modify the plug provided with the appliance. If 
it will not 

fi

 t the outlet, have a proper outlet installed by a quali

fi

 ed electrician.

This appliance is for use on a nominal 120-volt circuit, and has a grounding plug that looks like the plug illustrated in Figure 1 below. A temporary 
adapter illustrated in Figures 2 and 3 may be used to connect this plug to a 2-pole receptacle as shown in Figure 2 if a properly grounded outlet is 
not available. The temporary adapter should be used only until a properly grounded outlet (Figure 1) can be installed by a quali

fi

 ed electrician. The 

green-colored  rigid ear, tab, or the like extending from the adapter must be connected to a permanent ground such as a properly grounded outlet 
box cover. Whenever the adapter is used, it must be held in place by a metal screw.  Grounding adapters are not approved for use in Canada.
Replace the plug if the grounding pin is damaged or broken.
The Green (or Green/Yellow) wire in the cord is the grounding wire.  When replacing a plug, this wire must be attached to the grounding pin only.
Extension cords connected to this machine should be 12 gauge, three-wire cords with three-prong plugs and outlets.  DO NOT use extension cords 
more than 50 feet (15 m) long.

PLEASE NOTE:  FOR NORTH AMERICA ONLY

Содержание ProSpec HD101















Отзывы: