SSS Siedle DoorCom IP Multi DCIP 740 Series, Руководство пользователя, Страница: 29 / 32

29
The DoorCom Analog DCA 740‑...
is used as an interface between
DoorCom IP and an analog tel‑
ephone connection of a telecommu‑
nication system.
Up to 49 call destinations (addresses)
can be assigned to the DCA 740‑... .
The functionality depends in the
main on the capability of the tel‑
ephone system / on the telephones
connected to it.
The assignment and function‑
ality can be programmed in the
SIVS 610‑... .
The selection of users and control
and switching functions takes place
by means of DTMF dialling. The
telecommunications system and the
connected telephones must
therefore possess DTMF dialling
capability.
Power supply
The DCA 740‑... is supplied directly
from the SIVS 610‑... . A separate
supply is consequently not required.
The power to the a/b public net‑
work interface is supplied from the
telecommunication system or the
a/b public network connection from
the exchange. It is not possible to
connect an individual public network
telephone directly to the a/b line of
the DCA 740.
8 DoorCom DCA 740-01
With the reset button at the
IPVS 600‑..., it can be reset to the
as‑delivered status. It is essential to
load the Siedle factory configuration
in the IPVS 600‑... after a reset.
Proceed as follows.
1 Start the Internet Explorer on the
PC and enter the following in the
address line:
http://192.168.0.1
The IP settings in the as‑delivered
status of the IPVS 610‑...
User name: Service
Password: None issued on
delivery
The user interface is opened.
2 Select the Expert mode menu
item
3 Under Expert mode select the
menu point
Maintenance
.
4 Under Configuration select
"Search“ to find the configuration
file and select.
The file is on the supplied CD.
5 Select the file rtc_image.
6
Start the update with "Upload".
9 DoorCom IP
Factory setting IPVS 600‑...