SSS Siedle 4015739374687, Руководство пользователя

Страница: 7 / 16

3
English
Mounting
Application
LED surface area light for illumina-
ting the door station and/or info
signs in the entrance area. For
mounting inside the Siedle Vario
611 family. The LED surface area
light comprises the LED light and the
relevant information sign. Each
LEDF 600-... comes with a locking
key for inserting and removing the
info sign. The LEDF 600-... is con-
nected using the supplied terminal
block. When flush mounting, a flush
mount housing is recommended
under the LEDF 611-... . When a
deep housing is used for mounting,
it is possible to dispense with a
flush-mount housing.The terminal
block can be mounted using the
mounting adapter MA/LEDF 600-...
Recommended power supply using
the light line rectifier LNG 600-... .
Electrical voltage
Mounting, installation and servicing
work on electrical devices may only
be performed by a suitably qualified
electrician.
Important installation
instructions
• When mounting a module camera
under the LEDF 600-... observe the
distance of 3 modules between the
LEDF 600-... and the camera.
• When mounting a module camera
next to an LEDF 600-... observe the
distance of 1 module.
• The legibility of an inscribed
module is around 400 mm under-
neath the LED lighting unit.
1 Scope of delivery
• LEDF 600-...
with retaining plate (a)
• Info sign (b)
• 4 sheet metal screws (c)
• 4 clamping claws, short (d)
• 4 clamping claws, long (e)
• 4 plain washers (f)
• 4 wood screws (g)
• 4 dowels (h)
• Locking key (i)
• Clamping block (j)
Flush, surface or free-standing
mounting
2
Using the locking key, push the
two locking elements to the left
between the LED lighting unit and
the info sign. Tilt the info sign
forwards and remove from the
retaining plate.
3
Depending on the mounting
method, the film must be punctured
over the fastening holes on the
retaining plate.
4
Insert the terminal block on the
left-hand side of the housing and
connect the supply voltage. When
mounting in a deep flush-mount
housing, the mounting adapter
MA/LEDF 600-... which is available
as an accessory can be used.
5 When mounting on a flush-mount
housing GU 611-..., use the provi-
ded wood screws. Insert the
LEDF 600-... at the terminal block.
Insert the retaining plate in the
combination frame and screw to
the flush-mount housing using the
4 screws. The guiding holes in the
retaining plate and support edge are
designed to ensure a precise fit.
MR 611-..., ISM 611-... and
LEDF 600-... are always mounted
from bottom to top to ensure that
the sealing film lies in roof tile-type
formation under the module carrier
of the unit above.
6 The provided clamping claws are
required for fixing the retaining plate
when mounting the LEDF 600-... in
Vario housings GA 611-...,
BGA 611-..., free-standing solutions
etc. The long clamping claws are
required for frames with a long leg
length. The short clamping claws, by
Technische Daten LEDF 600-3/1-0
• Betriebsspannung: 20–30 V DC
• Betriebsstrom: max. 260 mA
• Farbtemperatur: 6000 K
• Lichtstärke: 367 cd/klm
• Lichtstrom: 164 lm
• Schutzart: IP 54
• Umgebungstemperatur:
-20°C bis +55°C
• Abmessungen (mm) B x H x T:
299 x 99 x 50
Technische Daten LEDF 600-4/1-0
• Betriebsspannung: 20–30 V DC
• Betriebsstrom: max. 335 mA
• Farbtemperatur: 6000 K
• Lichtstärke: 486 cd/klm
• Lichtstrom: 194 lm
• Schutzart: IP 54
• Umgebungstemperatur:
-20°C bis +55°C
• Abmessungen (mm) B x H x T:
399 x 99 x 50