SSR Motorsports SEEV-800, Технические характеристики

Страница: 12 / 28

9
pads, press out one brake pad with a clean slotted screwdriver to empty the space to take another pad.
After replacement of the new brake pads, the brake pad adjusting screw on the brake handle shall be
returned to the proper position (the position where you have a comfortable hand feeling).
③
Break-in Period: The break-in of the disc brake rotor needs a certain amount of time; after
completing break-in, the brake force will increase. In the first week, the new brake is in the break-in
period, it is not allowed to forcibly apply the brake; otherwise, the brake pad and the brake will be
irreversibly damaged. The correct operation method is to slightly engage the brake for normal driving
and keep a proper gap between the brake pad and the disc brake rotor.
④
Oil change: The disc brake system uses mineral oil. When feeling the brake handle fatigue, the oil
shall be changed (usually every 2~3 years) by means of suction via a hydraulic fluid evacuator.
(2) Precautions
①
Don’t apply lubricating oil to the disc brake rotor, brake pad and places near calipers. Do not touch
the disc brake rotor and brake pad surface directly by hand; otherwise, the brake performance will be
significantly reduced.
②
The new brake shall not be sprayed with water to avoid polluting the brake pads by a small amount
of lubricating oil in the assembly gap.
③
The oil pressure disc brake system has strong braking force, so you need to operate in a safe place,
so as to adapt to its difference with common brake systems. Avoid forcibly applying the brake, which
will cause the brakes to lock up which can cause an accident or damage the system.
7. Operation method and precautions for the charger: