SSP CAM/TZ YG-LED318, Руководство пользователя

Страница: 14 / 14

12 13
SET UPLd
Id ON
OFF
REST
dIM1
dIM3
dIM2
dIM4
dIM
OFF
MENU
SETTING
Select UPLD to upload the custom programs from the current MASTER unit to the
SLAVE units.
In order to activate the upload function the password must be entered.
Password is the same as the main access password.
When uploading the MASTER and SLAVE units will be black out.
On successful uploading of the custom programs the MASTER and SLAVE units will
display Cool White.
In order to reset custom modes to default values select REST .
Enter ID in order to allow/disallow ID address function from the DMX512
controller.
Enter dIM to select dimmer mode and dimmer speed. When DIMMER is set to Off ,
then RGBW and MASTER DIMMER are linear. The Dim 1/2/3/4 are speed
modes of the non linear dimmer ,
dIM1 is the faster, while dIM4 is the slowest. The
factory default setting is dIM4 .
MENU
3.10 SPECIAL SETTINGS
SET UPLD
ID ON
OFF
REST
RGBW
COLOR
Dim1
Dim3
Dim2
Dim4 Dim
UC
OFF
Off
SETTING
Select UPLD to upload the custom programs from the current MASTER unit to
the SLAVE units.
In order to activate the upload function the password must be entered.
Password is the same as the main access password.
When uploading the MASTER and SLAVE units will display YELLOW.
If an error occurs when uploading the MASTER and/or SLAVE units will display RED.
On successful uploading of the custom programs the MASTER and SLAVE units
will display GREEN.
In order to reset custom modes to default values select REST .
Enter ID in order to allow/disallow ID address function from the DMX512
controller.
COLOR is for activate/unactivate the color calibration functions.
When RGBW is selected, on RGB = 255,255,255, the color is displayed as calibrated
in CAL2 -- RGBW. When COLOR is set OFF , on RGB = 255,255,255, the RGB
values are not adjusted and the output is most powerful.
When [
UC ] is selected, the RGB output are adjusted to a standard preset universal color
which balances fixtures from different generations..
Enter Dim to select dimmer mode and dimmer speed. When DIMMER is
set to Off , then RGBW and MASTER DIMMER are linear. The Dim 1/2/3/4
are speed modes of the non linear dimmer , Dim1 is the faster, while
Dim4 is the slowest.
The factory default setting is Dim4 .
3.9 EDITING CUSTOM PROGRAMS
PR.01
PR.02
PR.10
SC.01
SC.02
SC.30
Red
Green
Blue
White
Strobe
Time
Fade
(0~255)
(0~255)
(0~255)
(0~255)
(0~20)
(0~255)
(0~255)
EDIT
MENU
EDIT CUSTOM
Enter the EDIT mode to edit the custom programs PR.01 to PR.10 .
Each custom program has 30 steps that can be edited.
Each step allows the creation of a scene using RED
Red , GREEN Green ,
BLUE Blue , WHITE White , STROBE Strobe , TIME Time & FADE
Fade .
APPLY:(Type- / )
APPLY:(Type- / )
APPLY:(Type- / )
3.11 WHITES CALIBRATION
WT01
WT02
WT11
Red
Green
Blue
White
(0~255)
(0~255)
(0~255)
(0~255)
CAL1
MENU
CAL1
Enter the CAL1 to select white color of different color temperature.
There are 11 pre-programmed White colors can be edited by using Red ,
Green , Blue & White .
APPLY:(Type- / )