Safety Precautions
Make sure to follow the information in this manual for your safety. Areas indicated with a
contain information relating to safety.
This device does not conform to explosion-proof specifications. Do not install it
in locations where flammable gases or solvents are handled, such as painting
booths etc. Doing so may result in fire or explosion.
This device is a precision electrical instrument. Avoid installing it in wet, oily,
hot, and humid locations. In particular, avoid locations of high humidity and
condensation. There is a possibility of fire due to breakdown.
Never use the device if you have a medical device such as a pacemaker in your
body. The weak electric current that flows into the body from the device may
damage such medical devices.
Installation
●
Do not use this device in the following locations, as doing so may cause malfunctions.
・
Locations subject to high or low
temperature, or high humidity
・
Dusty locations
・
Locations where the device may be
exposed to organic solvents such as
thinner
・
Locations where the device may be
exposed to corrosive gas
・
Locations subject to flames or
explosions
・
Locations subject to frequent vibrations
・
Locations subject to sudden changes in
temperature or humidity
・
Locations subject to condensation
・
Locations where the device may be
exposed to water or oil
Maintenance
Clean the touch buttons and measurement stand periodically. Failure to do so may result in
incorrect measurements.
Make sure to turn the main power of the device OFF before cleaning.
Handling
Make sure to connect the earth wire to an appropriate place. Accurate measurements are not
possible if the earth wire is not connected.
Do not disassemble or modify the device.
The battery discharges a small amount of electricity even when the device is turned off. If you
do not intend to use this device for an extended length of time, remove the battery.
If the device emits any abnormal odors or sounds, smoke, or heat, turn OFF the main power
immediately, and contact your point of purchase. Failure to do so may result in fire or a short
circuit.
Do not remove name plates or labels.
Do not do anything with the device that is not described in this manual.