10
8903/PB Profibus Communications Interface
Configuring the Profibus System
To configure the Profibus system, complete the steps below. Our example is shown using a PLC
configured using Siemens STEP7 For other systems, refer to the manufacturer's instructions.
Step 1: Configuring the Profibus TechCard using DSE 890
You can configure your Profibus TechCard using DSE 890.
Follow the instructions below.
Step 1.1: Inserting a PROFIBUS Function Block
Display your configuration page. Click on the Block menu at the top of the screen.
1.
Move the cursor down to select "890 Comms" and select "Profibus".
2.
Click to select the Profibus block. Move this to where you want on the screen then click
again to place the block.
Figure 8. Configuration showing PB function block
