SSANGYONG 2005 MUSSO SPORT, Руководство пользователя

Страница: 64 / 216

2–12 STARTING AND OPERATING
• ‘2H’ or ‘4H’
↔ ↔ ↔ ↔ ↔
‘4L’
To shift from ‘2H’ or ‘4H’ to ‘4L’, the ve-
hicle should be stopped.
Depressing the clutch pedal (with
manual transmission) or moving the
selector lever to ‘N’ position (with au-
tomatic transmission), select the 4WD
switch to ‘4L’ by rotating the 4WD low
(‘4L’) indicator light may come on.
WARNING
In case of part-time 4WD, do not use
4WD for normal driving on dry pave-
ment. It will cause unnecessary noise,
wear and fuel economy.
WARNING
To shift ‘4L’ position, completely stop
the vehicle and always depress the
clutch pedal, for manual transmission,
or position the selector lever to “N”,
for automatic transmission, and select
the 4WD switch to ‘4L’.
T.O.D (TORQUE ON DEMAND)*
Full time vehicle is equipped with T.O.D sys-
tem.
T.O.D privides the suitable power to front &
rear axle based on sensing data by Trans-
fer Case Control Unit, e.g. propeller shaft
speed, operating range of 4H & 4L and op-
erating of ABS.
T.O.D will help your vehicle to remain
steerable, stable around the corner
especially.
4-Wheel Drive Operation
• ‘2H’
↔ ↔ ↔ ↔ ↔
‘4H’ (Part-time only)
Depending on the road conditions, se-
lect the 4WD switch to ‘4H’ by rotating
before driving off or during driving.
Shifting is possible while driving at the
speed of 70km/h or less. The 4WD high
(‘4H’) indicator light may come on.
When 4WD is in no longer needed, se-
lect the 4WD switch from ‘4H’ to ‘2H’. This
will avoid unnecessary heavy steering,
tyre wear and fuel consumption.
NOTE
Perform this operation when driving
straight.
NOTE
When shifting ‘4L’
→ → → → →
‘4H’ in auto-
matic transmission, foot brake and
shift the selector lever to “N
→ → → → →
R
→ → → → →
N” after 4WD LOW indicator OFF for
smooth shifting.
When ‘4L’ operation is no longer needed,
select the 4WD switch from ‘4L’ to ‘2H’
or ‘4H’. To shift from ‘4L’ to ‘2H’ or ‘4H’,
stop the vehicle and depress the clutch
pedal (on manual transmission) or move
the selector lever to ‘N’ position (on au-
tomatic transmission) and select the
4WD switch to ‘2H’ or ‘4H’.
Musso sports_RHD_ E_02.p65 2005-04-26, ¿ÀÈÄ 3:19 12