SS Telecoms SS-76 NG, Руководство пользователя

Страница: 9 / 19

SS-76 NG USER MANUAL
DOC. NO: SS-76 NG (REVISION 05) Page 9 of 19
COMMAND TABLE
Command Description
SDL <Value>
Sets the logging port to be used in the event that a ‘generic’ translation option
is used. The available ports are:
Value Port Name
0 Serial Port 1
2 Serial Port 2
4 Ethernet Socket 1
SDM <Value>
Sets the serial port to be used in for MMI setup of the buffer. If socket 0 is set
up as a TCP listener then an incoming connection on that port will
automatically become the MMI port. While the TCP link is established the
serial port control will be disabled.
Value Port Name
0 Serial Port 1
2 Serial Port 2
XLT <Value>
Use the first few letters of the mode name. (XLT ALC will select the Alcatel
4400). Enough letters need to be entered so differentiate between options
otherwise the 1st match will be selected.
Value
Logging
Mode
Description
BIN Binary Unformatted data – any character sequence
ASC ASCII Vanilla ASCII using CR / LF
ROB RoboDog Proprietary Security
ISD ISDX The ISDX PABX
ALC Alcatel 4400 Alcatel 4400 PABX
LG Opticon LG Opticon PABX
STX StxEtx ASCII special start and end characters
AVA Avaya Avaya Definity – supplies option prompt
SYS Syslog CISCO Syslog. Can be used for any Syslog
IPS IPS 2000 Philips Sopho IPS 2000
CPU
CPU 3000 -
4000 Philips Sopho CPU 3000 / 4000
FTP Client The SS-76NG logs onto the PABX using IP address
FTP Server The SS-75NG wait for the PABX to log in
Note: If an invalid or unauthorised option for XLT is selected an option list is displayed with the
authorised options marked: