SRT CS100, Инструкция по установке и эксплуатации

Страница: 35 / 39

Configuration using proAtoN
Page 32
7.6 Other features
The proAtoN application provides the following additional features to support transceiver installation and
upgrade.
7.6.1 Offline configuration
A complete AtoN configuration including all schedule parameters, virtual AtoN configuration and other settings
can be saved to a file. This feature allows a configuration file to be created without access to the transceiver
hardware. The file can be loaded at a later time and synchronised with the transceiver hardware.
This feature is available using the ‘Save File’ and ‘Load File’ items available on the File menu. The configuration
is saved as a .pad file using a format proprietary to the proAtoN application.
When the proAtoN application is launched a new blank configuration file is created. You will be prompted to
save this file if changes are made without saving the file prior to closing the application, or if a ‘New file’ is
created from the File menu.
EPFS failure No position is available from the internal GPS receiver
- please contact your supplier.
DGPS input failed No data is available from the external source of
differential GPS correction data. Please check
connections, baud rate and equipment configuration.
Supply voltage The transceiver power supply voltage is outside of the
permitted range. The measured supply voltage is
displayed on the proAtoN diagnostics tab.
Low forward power The transmitter forward power is below a preset limit -
please contact your supplier.
Synchronisation lost Timing information is not available from the internal
GPS receiver - please contact your supplier.
Alarm text Description / Resolution