( 7 / 12)
W-DMX functions
1.
W-DMX is turned OFF. WPSU is used
as a DMX splitter. To turn the W-DMX
ON, hold the MODE button for three
seconds. MODE button will light
GREEN.
2.
W-DMX is ready to be linked, WPSU
works as s receiver of W-DMX signal
without linking to the transmitter.
Please hold the button on Transmitter
to start linking to W-DMX transmitter.
3.
W-DMX linked + DMX is missing on
Transmitter the W-DMX LED is
signalizing
this
by
blinking
in
RED/GREEN state. Bar-graph is now in
an active state.
To link out from Transmitter, hold the
W-DMX button for 10s; after that,
module will be in state 2.
4.
W-DMX is linked to Transmitter and
receiving DMX signal. Both indicators
are GREEN. Bar-graph is working and
showing W-DMX signal strength.
