SRS Lighting DST4WH-3, Инструкция по эксплуатации

Страница: 6 / 8

W-DMX functions
1. W-DMX is turned off. DST4W
functions as a DMX splitter. To
turn the W-DMX on, hold the
mode button for 3 seconds. The
MODE button lights in green
color.
2. W-DMX is ready to be linked.
DST4W works as a receiver of
the W-DMX signal without a link
to the transmitter.
Hold button on the
Transmitter
to start the linkage of DST4W.
3. W-DMX is linked. DMX is missing
on the Transmitter.
The W-DMX LED signalizes this
by blinking in red/green color.
Bargraph is in an active state.
To
disconnect from the
Transmitter, hold the W-DMX
button for 10 sec. Module will
turn to state 2.
4. W-DMX is linked to the
Transmitter and is receiving the
DMX signal. Both indicators are
in green color. Bargraph is
working and showing the W-DMX
signal strength.