SRS Light Design s.r.o
, Rybničná 36/D , 831 06 Bratislava, Slovak Republic tel:+421244681417,
fax:+421244681419,
www.srslight.com
,
W-DMX functions
1.
W-DMX is turned off. WPSU is
used as DMX splitter. To turn the
W-DMX on, hold the mode button
for three seconds. Mode button
will light GREEN.
2.
W-DMX is ready to be linked,
WPSU works as receiver of W-
DMX signal without linking to the
transmitter.
Please hold the button on
Transmitter to start linking to W-
DMX transmitter.
3.
W-DMX linked + DMX is missing
on Transmitter the W-DMX LED is
signalizing this by blinking in
RED/GREEN state. Bargraph is
now in an active state.
To link out from Transmitter, hold
the W-DMX button for 10s; after
that, module will be in state 2.
4.
W-DMX is linked to Transmitter
and receiving DMX signal. Both
indicators are GREEN. Bargraph
is working and showing W-DMX
signal strength.
