SRS Light Design s.r.o
, Rybničná 36/D , 831 06 Bratislava, Slovak Republic tel:+421244681417,
fax:+421244681419,
www.srslight.com
,
Device in use:
By default, Power LED indicates whether the device is on main power. When Power LED
does not come up, please check mains power input or fuse. Always use fuses of the
same rating as the one received from manufacturer or one of rating written on backside.
When the DMX cable is connected to device, LED marked DATA goes on; this indicates
that WPSU is receiving the DMX signal. DATA LED indicates the ON state of Termination
during the Power On sequence. To avoid misunderstanding between DATA and
Termination indication, do not terminate the device without DMX data. Once the DMX
signal is received, the terminal indication will be overridden by DMX DATA.
The speed of light on these LEDs also indicates the refresh rate of DMX signal.
DATA LED fast blinking stands for high refresh rate, while slow blinking means slow
refresh rate.
Scroller connection:
Use only approved scroller cable. Approved cable should have two conductors of 14 AWG
wire for power and two shielded and twisted conductors of 22 AWG wire for data.
The following pinout for the 4-pin connector must be followed:
PIN1: DC_GND
PIN2: DATA-
PIN3: DATA+
PIN4: DC+24V
Optionally unit can be equipped with DC12/36V/48V PSU
Additional scrollers can be daisy chained together from the OUT plug. Connect the last
scroller to the return line of WPSU for termination and power supply.
Compatible equipment watt consumption:
Rosco I-Cue
17 watts
Rosco DMX Indexing Rotator
6 watts
AC Lighting/Apollo Chroma Q Broadway
22 watts
AC Lighting/Apollo Chroma Q M1, 2, 5, 8
36 watts
Apollo Roto-Q
12 watts
City Theatrical DMX Iris
8.5 watts
DHA Gobo Carousel
18 watts
DHA Twin DMX
12 watts
Rainbow 6", 8", 12" Pro Colour Scroller
14 watts
Rainbow 15" Pro Colour Scroller
29 watts
Gam Indexable Twin Spin
14.4 watts
Gam SX-4, 6 Gobo Tray
10.8 watts
