SRS Labs GMC12-LV-H6, Инструкция по эксплуатации

Страница: 8 / 12

( 8 / 12)
5. Output connectors wiring
5.1 Harting6 LV hoist connector
5.2 Remote connector *optional
Neutrik NC5-MAH/FAH
Connectors are used for link operation of units. Up to 30 units can be linked and in local operation
mode their control is via one GO and E-STOP button
Pin Function note
1 Data CMN Data Common
2 Data - Data Minus
3 Data+ Data Plus
5.3 Loadcell E-STOP connector *optional
Neutrik NC4-FAH
Pin Function note
1 DC24-36V Connected to 3
2 Active 1 Active line 1
3 DC24-36V Connected to 1
4 Active2 Active line 2
Both safety lines are separate and NO /normally open/. For loadcell E-STOP activation contacts need
to go to NO /normally closed/ state for E-STOP activation.
For reset a loadcell e-stop function please cycle the E-STOP mushroom on device.
Pin Function Note/signal
1 Live L1 brown
2 Live L2 black
3 Live L3 gray
4 Control COMMON
5 Control UP
6 Control DOWN
Ears/body Earth Yellow/Green