4.4 Adjusting the Handlebar
The distance between the seat and the handlebar can be significantly increased by removing the
handlebar slider with stem facing backwards, and re-installing it facing 180° so that the stem faces
forwards, using the following procedure:
4.5 Gears and Drive-train
The drive-train of the SmartIT includes an 11- speed gear shift. This allows a realistic riding
experience, since the gear can be changed as the SmartIT Brake changes the pedaling resistance,
just like if you were going up or down hills. Set up and adjust derailleur as for a normal bike.
Plug in the power cable into the socket to
power the SmartIT. The socket is located on
the bottom side of the frame just below the fork.
Lift the frame on the front side to reach the socket.
Be careful not to rest the power supply connector
on any object as it may damage the connector.
6
1. Remove the handlebar from the stem (see picture)
2. Remove the end-cap and take our the slider
3. Rotate the slider and re-install so that the stem is facing forward.
4. Re-attach the handlebar (use 4 Nm for the screws on the stem)
and end-cap
4.6 Installing pedals
The SmartIT is delivered without pedals. Please, install your pedals according to the installation
instructions of the pedal manufacturer.
4.7 Power Supply
