6. Settings Menu
To access the SmartIT settings, press
MODE
and
SET
at the same time. You can navigate
with the arrow key between the individual menu entries.
6.1 Pairing the PowerMeter
6.3 Pairing sensors to PC8
Please refer to PC8 User Manual.
Press
SET
to enter the PowerMeter menu.
Press
SET
again in the serial tab to search for
the Powermeter. When the Powermeter has been
found, the status will switch to connected and
serial number will be shown in the serial tab.
To set the zero offset, navigate to the Calibration
Value (Cal. Value) and press
SET
to search
and store the received Zero Offset. The current
power and cadence (rpm) is displayed in the
“Data” tab if the PowerMeter is in use.
Press
MODE
to go back in the main menu.
6.2 Pairing Heartrate
Navigate to Heartrate and press
SET
to enter
the menu. Press
SET
again to scan for a
Heartrate device.
When the Heartate device has been found the
Status will switch to Connected and the Serial
Number is displayed in the serial tab, also the
current Heartrate is displayed in the data tab.
Press
MODE
to go back to the main menu
and save the changes.
10
