Schoberer Rad Messtechnik GmbH
Rudolf Schulten Str. 6
D-52428 Jülich
Tel.: +49-2461-69123-0
Fax:+49-2461-69123-17
www.SRM.de
Page 3 of 22
IndoorTrainer electronic User Manual
Before First Use
The flywheel (the wheel with the three engraved SRM logos) may become extremely hot during
use!!
The seatpost and the handlebar post are height-adjustable and not secured by springs. Hold on to
the post while adjusting the seat and bar height to avoid the posts hitting the frame.
The IndoorTrainer's flywheel sticks out behind its rear end. When lifting and moving the
IndoorTrainer, avoid floor contact with the flywheel. The flywheel is made of aluminum. Aluminum
is a soft metal, which is easily damaged.
The brake electronics are located in the brake box which is attached to the frame. The brake box
is not waterproof. When cleaning the IndoorTrainer, do not let water get inside the brake box.
Clean the box only with a damp cloth.
Do not connect the brake power cord to a computer. It is not designed for use with a USB port.
Use the charger that comes with your IndoorTrainer.
In order to control the IndoorTrainer via a computer, the appropriate software (by Gobat Software)
must be installed. The IndoorTrainer can not be controlled via the SRMWin software.
