Copyright By SRC
Design and Specification are subjected to change
Page 2
Mounting Instructions
Before installation,
remove the original Guard
and original crash bar (as
show)
As show RH motorbike
As show LH motorbike
Orient the Bracket RH (2)
and slip-in the Bush RH (7)-1
off, the washer M10 (13) – 1
off, the long bolt M10x95
(12)-1 off,
Orient the Bracket Lower (4)
and slip-in the taper ring
(15) – 1 off, the screw
M8x30 (10) – 1 off,
And tighten it to torque as
shown in the BOM table.
As show RH motorbike
