Copyright By SRC
Design and Specification are subjected to change
Page 4
Step 3:
Mount/Fit the Pin for Mounting
(6) – 4 off on the Mounting Plate
(2) and 2 off on the Bottom Plate
(5), as shown.
The Pins for Mounting Head Light
Guard, can be assembled Off-line
too.
Off-line Assembly of Washer M5
(9) – 4 off, Screw M5 x 10 (11) – 4
off, is done to secure the “Pin for
Mounting” (6) to the Mounting
Plate (2), as shown from the rear
side.
Similarly, Off-line Assembly of
Adaptor for Rubber mount (6) – 2
off and Rubber Mount (7) – 2 off,
is done to secure the 2 off Pin for
Mounting (6), at the lower side of
the Plate for Mounting (6).
