Copyright By SRC
Design and Specification are subjected to change
Page 3
Mounting Instructions
Step 1:
Step 1:
Orient and Align the Mounting
Plate (2), as shown in the
drawing, with the Top two
mounting holes in line with the
Mounting Holes in the
Motorbike (under the
Windshield bracket).
Slip-in the Washer M6 (8) – 2
off, Screw M6 x 16 (13) – 2 off
from the rear side and pass it
through the Mounting holes in
the Windshield bracket and
Mounting Plate and secure
using the M6 Nut (12) – 2 off
and tighten it.
Step 2:
Orient the Bottom Plate (5), as
shown in the drawing, and slip-in
the M6 x 16 Screw (13) – 1 off from
the Top side of the Motorbike
Bracket, and hold it from the
bottom side using Washer M6 (8) –
1 off and M6 Nut (12) – 1 off and
tighten the threads.
