39
Fork Installation
On one side of the fork, tighten the top bolt on the lower crown to the
On one side of the fork, tighten the top bolt on the lower crown to the
specified torque, then tighten the lower bolt on the lower crown to the
specified torque, then tighten the lower bolt on the lower crown to the
specified torque.
specified torque.
Tighten the top bolt to torque once more, then tighten the bottom bolt
Tighten the top bolt to torque once more, then tighten the bottom bolt
to torque again.
to torque again.
Repeat this tightening procedure for the bolts on the other side of the
Repeat this tightening procedure for the bolts on the other side of the
lower crown.
lower crown.
Tighten each upper crown pinch bolt to the specified torque.
Tighten each upper crown pinch bolt to the specified torque.
Position and hold the brake hose on the lower leg brake hose guide,
Position and hold the brake hose on the lower leg brake hose guide,
reinstall the clamp, and tighten the bolt finger tight.
reinstall the clamp, and tighten the bolt finger tight.
NOTICE
To avoid damage to the hose guide and lower leg, do not over
tighten the hose guide bolt.
Reinstall the brake caliper according to the brake manufacturer's
Reinstall the brake caliper according to the brake manufacturer's
instructions.
instructions.
6
4 mm
5 N·m (40 in-lb)
4 mm
5 N·m (40 in-lb)
7
4 mm
8 N·m (70 in-lb)
8
2.5 mm
9