SR Scales SR615, Руководство по эксплуатации и обслуживанию

Страница: 9 / 14

Model: SR615 Infant Scale
Operating and Service Manual - S/N 3706+
Part No.: MAN615_110210
Page 9 of 14
S
Instruments, Inc.
,
600 Young Street, Tonawanda, NY 14150
Tel: 716-693-5977 Fax: 716-693-5854 URL: www.srscales.com
email: sri@srinstruments.com Copyright 2011
S
Instruments, Inc.
BASIC SYSTEM OPERATION CONT’D
CONTINUOUS WEIGH
In this default mode, the weighing surface remains active. Press the “ HOLD ” button once to lock
the displayed reading and store it in memory as the “last weight” for recall later if needed. Zero
will clear memory.
AUTO-HOLD (ACTIVE PATIENTS)
For active patients, this mode locks, stores and displays the patient’s weight. Zero will clear
“locked” weight. The minimum weight for the AUTO-HOLD mode to function is 1.10 pounds.
To enable AUTO-HOLD mode, press and hold the “ HOLD ” button for approximately five
seconds until the display reads “ AUTO-HOLD ENABLED ” . Repeat the procedure to return to
“ CONTINUOUS WEIGH ” mode.
BATTERY REPLACEMENT
STEP 1
: Display will read “ REPLACE BATTERIES ”.
STEP 2 : (Figure 4) Turn the scale over and unscrew the
two (2) screws from the Battery Compartment Cover.
STEP 3 : Remove and replace ALL six (6) “D” cell
batteries. Refer to battery compartment cover label for
placement.
STEP 4 : Replace the Battery Compartment Cover and
securely tighten screws.
STEP 5 : Press the “ READ ” button to confirm display is
working.
STEP 6 : Zero the system.
Figure 4: Battery Compartment Cover &
Screw Locations