Model SRV713W Series
Operating and Service Manual
Part No. MAN713W_210526
Page 8 of 14
S
Instruments, Inc.
,
600 Young Street, Tonawanda, NY 14150
Tel: 716-693-5977 Fax: 716-693-5854 URL:
email:
Copyright 2021
S
Instruments, Inc.
“LB/KG MODE”
Pushbutton
Switch
BUTTON FUNCTIONS
The “
DISPLAY
” button is used to turn the system on and display the subject’s weight.
The “
DISPLAY
” button is also used to zero the system by pressing and holding the “
DISPLAY
”
button for 2-3 seconds.
LB/KG MODE
The “
LB/KG MODE
” Toggle Button (Figure 2) allows weight data to be viewed in either pounds
or kilograms, displayed in a resolution of 0.2 pounds or 0.1 kilograms.
The “
LB/KG MODE
” Pushbutton is located within the battery compartment on the underside of
the scale. Select the mode for weighing with this Toggle Button.
Figure 2: LB/KG Mode Pushbutton Switch
BASIC SYSTEM OPERATION
Ensure that the scale is free and clear of any obstructions before operating.
Press the “
DISPLAY
” button and hold it for 2-3 seconds. The display will read “0.0” and be
ready for weighing.
When a mat or pad is to be used on the scale platform, the weight of the pad must be tared out.
Place the mat on the platform, then press and hold the “
DISPLAY
” button for 2-3 seconds. The
display will read “0.0”.
Note
:
The display will automatically shut down after five minutes. The zero (TARE)
will be stored in memory.
Assist the animal on the scale platform; its weight will appear on the display.
Note
:
The display will automatically shut down after five minutes. Press the
“
DISPLAY
” button to restart.
It is recommended that the system be zeroed prior to each subject being weighed.