Model SRV957 24 X 48 Wall Mount Display Platform
Operating and Service Manual
Part No. MAN957_220721
Page 3 of 16
S
Instruments, Inc.
,
600 Young Street, Tonawanda, NY 14150
Tel: 716-693-5977 Fax: 716-693-5854 URL:
email:
S
Instruments, Inc.
PACKING CHECKLIST – Model SRV957
Wall Mount Display Platform Scale
ASSEMBLY
STEP 1
: Unpack the scale system and check parts against the
PACKING CHECKLIST
. If
there are any missing or damaged parts, call the Service Hotline at: 1-800-654-6360.
STEP 2
: Determine installation location for scale and display, keeping in mind the display cable
length is eight (8) feet and the display power cord length is five (5) feet. If desired, provisions for
wall mount have been incorporated, and can be accomplished in the manner described below.
A.
The display should be installed by qualified personnel. The mounting hardware provided
will cover most wall applications.
B.
Determine a position on the wall comfortable to the user. Mark the location of the two (2)
mounting holes on the wall (holes are spaced 2.5” on center apart) using the template
provided on page 15.
C.
Drill the two (2) pilot holes, no larger than ¼” diameter in the locations marked. Install the
two (2) self-drilling screw anchors.
D.
Install the two (2) #8 x 1” flat head screws supplied, leaving approximately ¼” projecting
from the wall.
STEP 3
: Connect signal cable to the underside of the platform.
STEP 4
: Place SRV957 scale platform on a flat, hard floor surface. Ensure all six feet of the
scale are in contact with the floor and scale does not rock
.
NOTE:
Scale should not be placed on carpet or uneven floor surfaces as this may interfere
with scale accuracy.
STEP 5
: Connect the signal cable to the scale display, then connect the power cable to the scale
display and plug power adapter into wall.
DESCRIPTION
QUANTITY
SCALE PLATFORM
1 ea.
SCALE DISPLAY
1 ea.
SIGNAL CABLE
1 ea.
AC WALL POWER SUPPLY (MEDICAL GRADE)
1 ea.
MOUNTING HARDWARE
1 ea.
CERTIFICATE OF CALIBRATION
1 ea.
MANUAL
1 ea.
