Model SR555
i
Series Stand-On Scale
Operating and Service Manual
Part No. MAN555
i
-KG_MICROBAN_201001
Page 7 of 22
S
Instruments, Inc.
,
600 Young Street, Tonawanda, NY 14150
Tel: 716-693-5977 Fax: 716-693-5854 URL:
www.srscales.com
email:
Copyright 2020
S
Instruments, Inc.
ASSEMBLY (Cont’d)
STEP 2:
Apply a small amount of Loctite
to the two small screws and attached the Printer
Mounting Bracket to the Printer Mounting Collar. (Figure 6).
STEP 3:
Attach the Printer to the Printer Mounting Bracket.
STEP 4:
After the Display Unit (1) is installed, refer to page 4, plug the Printer Cable (10) into
the Printer and into the connector on the bottom of the Display Unit; tighten Printer Cable screws.
REPLACEMENT PARTS and ACCESSORIES
SYSTEM DESCRIPTION and INTENDED USE
SYSTEM DESCRIPTION
The SR555
i
–KG Stand-On Scale System employs the latest in microprocessor and load cell
technology to provide accurate and repeatable weight data. Four (4) identically matched
transducers are strategically placed to ensure an accurate representation of the patient’s weight.
The low power microprocessor circuitry allows the SR555
i
-KG to derive its power from six (6)
common “C” cell batteries that will provide up to 10,000 weight readings before needing
replacement. This eliminates the need for an external battery charger.
The SR555
i
-KG can be powered by a Medical Grade AC wall power supply, with the “C” cell
batteries providing backup power. Continuous wall power allows the unit to be always on and
ready to take weight readings without the need to make contact with the membrane switch.
The patient’s weight is displayed on a 16-character dot matrix LCD. The weight data may be
viewed in kilograms with a displayed resolution of 0.1 kg.
Part #
Description
FRGSM06U09P1J
Medical Grade AC Power Supply
SR3070
Handrail Set with assembly hardware
SR3086MB-CM
Height Bar: Extends from 109 cm to 201 cm
SR8219
Printer Kit (optional; contains all printer parts listed below)
FRAP1300
Printer
FRAP1300BR-01
Printer Mounting Bracket
SE8294
Printer Cable
FRAP1300BP01
Rechargeable Battery Pack
FRTP130012C
Paper, thermal printer 58mm (10 rolls)
FRBC1300
Printer Battery Charger
MF8209
Printer Mounting Collar
Continued next page
