3
Attaching Your Suit and Gearing Up
For a comprehensive video on how to attach your container to your wingsuit, please watch our
Gearing Up video:
www.squirrel.ws/gearingup
Zipper Bungees
The bungees that hold the zippers tight to the main lift webbing (MLW) of your harness must
always be connected.
DO NOT
jump your suit without the zipper bungees set tightly around your
harness MLW. Tying the bungees on the inside of the MLW usually results in the zippers being
closer, and the hole being smaller.
We highly recommend using a standard pillow handle as the best choice for wingsuit flying. For
more detailed information on the decision of what handle type is best, please see our Reserve
Handle Information PDF here:
www.squirrel.ws/handles
NOTE:
If you think that the zipper system is not functioning well with your skydive harness (i.e. your
emergency handles are not always 100% accessible), please contact us before your next jump.
You may need to modify the zippers so that the sliders stay locked in place, as per the information
at this URL:
www.squirrel.ws/zipperstuff
Keep zippers close against MLW webbing.
Handles completely exposed.
Zippers tight against MLW.
