Squirrel Systems SQ-2020, Руководство оператора и по обслуживанию, Страница: 80 / 80

APPENDICES
6-22 Preliminary Release
APPENDIX I
LCD BRACKET PREPARATION FOR MOUNTING
THE LQ121S1DG41 DISPLAY
REAR VIEW
3/24/05
11.83”
4.28”
88-052-5
RF Gasket
1.80”
2.50”
11.32”
4.87”
88-054
2.125” x 1.625”
Material: E07
HR, Foam
NiCU C70
Fabric in a
high-resiliency
(HB) formula
88-052-1
RF Gasket
Material: E77 HR, Foam
NiCU Fabric PSA
(Schlegel)
86-016
Cable Tie Mount
32-017
Inverter – DMA23058
88-052-2
RF Gasket
Note:
When placing the RF Gaskets, there
should be no gap in between the end of the
RF Gasket strip and the start of the next RF
Gasket strip.
STEP 4
INSTALL CABLE TIE MOUNT TO
SECURE LCD DATA CABLE AFTER
CABLE IS IN POSITION.
STEP 1
INSTALL RF GASKET STRIPS AROUND
PERIMETER OF BRACKET.
83-006
#6 NYLON WASHER
82-004
#4-40 x 1/4 SCREW
86-016
Cable Tie Mount
STEP 5
INSTALL CABLE TIE MOUNT TO SECURE
BACKLIGHT CABLE AFTER CABLE IS IN POSITION.
88-052-4
RF Gasket
STEP 2
INSTALL INVERTER AND INVERTER
CABLE.
88-052-6
RF Gasket
76-208
Backlight Cable
88-052-3
RF Gasket
STEP 3
THE 2.125” X 1.625” GASKET SHOULD BE
INSTALLED AFTER ‘DG41 DISPLAY IS
MOUNTED TO THE BRACKET AND THE
LCD DATA CABLE HAS BEEN
POSITIONED AND PASSED THRU THE
OPENING.
Two drops of torque seal
will be applied to either side
of the mating connector.