background image

Manual |  Storm1000

DMX Values In-Depth (4-Channel Pixel Mode)

Menu

Sub-menu

Function

1

000 <--> 021
022 <--> 255

No Function
Red/Segment Intensity (0% <--> 100%)

2

000 <--> 021
022 <--> 255

No Function
Green/Segment Intensity (0% <--> 100%)

3

000 <--> 021
022 <--> 255

No Function
Blue/Segment Intensity (0% <--> 100%)

DMX Values In-Depth (8-Channel Pixel Mode)

Menu

Sub-menu

Function

1

000 <--> 021
022 <--> 255

No Function
Red/Segment 1 Intensity (0% <--> 100%)

2

000 <--> 021
022 <--> 255

No Function
Green/Segment 1 Intensity (0% <--> 100%)

3

000 <--> 021
022 <--> 255

No Function
Blue/Segment 1 Intensity (0% <--> 100%)

4

000 <--> 021
022 <--> 255

No Function
White/Segment 1 Intensity (0% <--> 100%)

5

000 <--> 021
022 <--> 255

No Function
Red/Segment 2 Intensity (0% <--> 100%)

6

000 <--> 021
022 <--> 255

No Function
Green/Segment 2 Intensity (0% <--> 100%)

7

000 <--> 021
022 <--> 255

No Function
Blue/Segment 2 Intensity (0% <--> 100%)

8

000 <--> 021
022 <--> 255

No Function
White/Segment 2 Intensity (0% <--> 100%)

Troubleshooting

Symptom

Solution

Fixture Auto- Shut Off

If it is stopped or dimmer than normal, the unit may have shut itself off due to high heat. This is to 
protect the fixture from overheating. No Light Output Check to ensure fixture is operating under

No Light Output

Check to ensure fixture is operating under correct mode, IE sound active/auto/DMX/Etc., if appli-
cable.

Chase Speed  
Too Fast/Slow

Check to ensure proper setup of speed adjustment.

No Power

Check fuse, AC cord and circuit for malfunction.

Blown Fuse

Check AC cord and circuit for damage, verify that moving parts are not restricted and that unit’s 
ventilation is not obstructed

Slow Movement

Check that speed channels are set appropriately.

Fixture Not Responding / 
Responding Erratically

Make sure all connectors are seated properly and securely. Use Only DMX Cables and/or check 
cables for defects Install a Terminator. Reset fixture(s).

Fixture Moving On Its Own

Verify proper mode of operation. Is the fixture in “Auto” mode?

Содержание Storm1000



















Отзывы: