Manual | Storm1000
DMX Mode
Allows the unit to be controlled by any universal DMX controller.
Set the Starting DMX Address:
The default mode for the fixture is DMX, so the first menu item that you can edit is the starting DMX address.
1.) Press the
<UP/DOWN>
buttons until you reach
Address
.
2.) Push the
<ENTER>
button.
3.) Use the
<UP/DOWN>
buttons to select a channel from
001-512
.
4.) Press the
<ENTER>
button to confirm.
5.) Press the
<ESC>
button to return to the main menu.
Select the DMX Channel Mode:
1.) Press the
<UP/DOWN>
buttons until you reach Config.
2.) Push the
<ENTER>
button.
3.) Using the
<UP/DOWN>
buttons, highlight
DMX Mode
, then press
<ENTER>
.
4.) Use the
<UP/DOWN>
buttons to select
1, 3, 4, 7, 8, 16, or 4/8
pixel modes.
5.) Press
<ENTER>
, and then press the
<ESC>
button until you reach the
Address
screen.
Master/Slave Mode:
1.) Disconnect fixture(s) from any DMX signal source.
2.) Set each fixture to matching DMX modes.
3.) Connect all fixtures together via DMX. The first fixture in the DMX chain will be the master, followed by the
slave fixtures.
4.) Connect DMX controller to the master unit for DMX control.
Load Default Settings:
1.) Press the
<UP/DOWN>
buttons until you reach
Load Default
.
2.) Push the
<ENTER>
button.
Auto & Standalone Modes:
Allows a single or Master/Slaved units to run factory installed programs at user selectable speeds.
Auto Mode:
1.) Press the
<UP/DOWN>
buttons until you reach Auto.
2.) Push the
<ENTER>
button.
3.) Use the
<UP/DOWN>
buttons to select from Mode 1 to Mode 6.
4.) Press the
<ENTER>
button to confirm.
Auto Program Speed:
1.) Press the
<UP/DOWN>
buttons until you reach Speed.
2.) Push the
<ENTER>
button.
3.) Use the
<UP/DOWN>
buttons to select from
000-031
.
4.) Press the
<ENTER>
button to confirm.
Содержание Storm1000
Страница 1: ...SquareLED Storm1000 ...
