Manual | SquareLED UNIVERSAL LED BLINDER 5x10W RGBW 4in1 CREE
5. Setup
Fixture linking
When you control the light‘s master/slave or DMX 512 signal agreement, the lights can be connected by signal
wire which the distance is ≤ 500 m,The maximum connect lights are 32pcs more or less, and adapt DMX light
pair to segregate the signal zoom equipment, in order to protect the light’s signal won’t be interrupted by
other signal. Moreover, it won’t affect by the signal wire’s length
Data connect
Data cable is connected by DMX data wire, and XLR. Please use hi-quality data cable signal wire, it won’t be
interrupted by magnetic.
Characteristics of DMX data cable
2 conductors’ double tree lace and shield.
The maximum capacitance of the conductors-30 pF/ft.
The maximum capacitance of the conductor and shield -55 pF/ft.
The maximum resistance is 20 ohms/1000ft.
The nominal impedance 100-140 ohms.
DMX opt coupler segregate signal zoom equipment’s 3 pin(5 pin) XLR plug.
Cable wire‘s adapter:
The two sides of signal cable wire is consisted of 1 pair femal and male 3 XLR plug, which is correspond the
lights or DMX controller,
Setting up a DMX signal connect
As following pictures show, please connect the first light to the signal cable which is with XLR by DMX
controller, then, connect light in series.
The light must be set up the ventilating place. To confirm there is nothing to hinder the heat dissipation place.
When the light is hanged, please choose a safety wire.
»
»
»
»
»
»
