Manual | SquareLED UNIVERSAL LED BLINDER 5x10W RGBW 4in1 CREE
FLAS (Strobe setting)
F0XX** (the total speed of strobe to be adjusted)
FrXX (To adjust red brightness seperately)
FgXX (To adjust green brightness seperately)
FbXX (To adjust blue brightness seperately)
FAXX (To adjust white brightness separately)
Lrgb (Adjust separately Led brightness)
LrXX (To adjust red brightness separately)
LgXX (to adjust green brightness separately)
LbXX (To adjust blue brightness separately)
LAXX (To adjust white brightness separately)
CHAS (built in program)
C001-C010 (fast to slow perform)
CHSE (channel setting)
CH24 (DMX512 CH 24)
CH08 (DMX512 CH 8)
FACT (Restore factory settings)
FA00-01 FA01 restore factory setting after pressing „ENTER“ (factory setting is DMX mode)
„Add“, of „.“ Which should show as flicker, non-flicker means no signal or wrong signal
***Shade: Red from bright to be off, then, green from bright to be off, then, blue from bright to be off, then
red from bright to be off, ...
****Change: Red bright, red be off, green bright, green be off, blue bright, blue be off, red bright...
XX“ Value: „01-10“.
User configurations
Set-up 1pcs light‘s menu mode (Auto-running)
Press the MENU, such as the grafic shows the menu function
Use the UP/DOWN buttons to choose the right one to confirm.
To set Master-slave mode
Press the MENU, same as the grafic showsthe menu function
Master: set any one of lights to auto sound or strobe control mode
Slave: Set them to DMX mode and their address code to 1.
»
»
»
»
»
