4
DMX-512 connection with DMX terminator
For installations where the DMX cable has to run a long distance or is
in an electrically noisy environment, such as in a discotheque, it is
recommended to use a DMX terminator. This helps in preventing
corruption of the digital control signal by electrical noise. The DMX
terminator is simply an XLR
plug with a 120 OHM resistor connected
between pins 2 and 3, which is then plugged into the output XLR
socket of the last fixture in the chain.
Display Menu
Menu
Sub-menu
Config Mode
Channel Mode
XXCH
Keep Screen On
Enable/Disable
Keep DMX Data
Enable/Disable
Fan speed
low/standard/high
Fast Dimmer
Enable/Disable
System Info
Temperature
Head XX
℃
Body XX
℃
RDM
RDM_Status
Enable/Disable
RDM_UID
XXX
RDM_ID
XXX
RDM_Label
XXX
Led All On
Led All On
Auto Test
Auto Mode 1
Auto Mode 2
Auto Mode 3
Auto Mode 4
Fan Test
On/Off
Led Load Defaul
False/True
