14
3) Press the
【
ENTER
】
button to escape and save.
Illustrations
：
“ADDR” “CTST” and “PROG” are not reset, the others reset to the underlined value of the word.
6.17
【
PROG
】
SELF-PROGRAMMING PARAMETER RESET
1) Press the
【
ENTER
】
button in
【
PR L
】
menu, then enter to the
【
PROG
】
self-programming parameter reset.
2) Press the
【
UP/DOWN
】
button to select
【
YES
】
.
3) Press the
【
ENTER
】
button to escape and save.
6.18
LIGHTING PARAMETER DOWNLOADING EACH OTHER VIA DMX
CABLE
1) Press the
【
ENTER
】
button in
【
SEND
】
menu, then enter to sending parameter to other lightings.
2) Press the
【
UP/DOWN
】
button to select
【
YES
】
.
3) Press the
【
ENTER
】
button to confirm sending.
Illustrations
：
1)Please disconnect the connection of projector and DMX console before sending the parameter.
2)The information of
【
ADDR
】、【
CAL
】
can’t be sent, can’t be downloaded each other.
3)There will be an automatic reset of the other projectors after receiving parameter correctly.
7.
Instruction for compatible Sweden DMX wireless
module
1)
There are 4 modes: compatible Sweden receive mode(green indicator), compatible Sweden transmit
mode(blue indicator), normal mode(yellow indicator),custom mode(red indicator)
2)
After
【
RESET
】，
and then press
【
KEY
】
to switch above modes, select needed mode and press
【
KEY
】
one
second to confirm and save it.
3)
Under compatible Sweden DMX receive mode, press
【
KEY
】
3 seconds to delete matching between light and
transmitter.
4)
Under compatible Sweden DMX transmit mode, press
【
KEY
】
to match receive mode, press 3 seconds will
delete matched mode.
5)
Working in normal mode, indicator has 7 colors for option, when light and transmitter indicator are in the
