Caution!
Be careful with your operations. With a dangerous voltage you can suffer a dangerous electric shock
when touching the wires! Keep this device away from rain and moisture! Make sure it is grounded
when using it! Unplug mains lead before opening the housing! For your own safety, please read this
user manual carefully before you initial start-up.
Introduction
Thank you for having chosen „Color Designer 18x12W RGBAW+UV“. You will see you acquired a
powerful and versatile device. Unpack your item. Before you initial start-up, please make sure that
there is no damage caused by transportation. Should there be any, consult your dealer and do not use
the device.
Safety instructions
This device has left our premises in absolutely perfect condition. In order to maintain this condition
and to ensure a safe operation, it is absolutely necessary for the user to follow the safety instructions
and warning notes written in this user manual. Always disconnect from the mains, when the device
is not in use or before cleaning it. Keep away children and amateurs from the device! There are no
serviceable parts inside the device. Maintenance and service operations are only to be carried out by
authorized dealers.
Features
Three operation modes: DMX 512 protocol, auto and master/slave and operating in various modes to
form different led effects
DMX-512 connection / connection between fixtures Occupation of the XLR-connection:
If you are using controllers with this occupation, you can connect the DMX-output of the controller di-
rectly with the DMX-input of the first fixture in the DMX-chain. If you wish to connect DMX-controllers
with other XLR-outputs, you need to use adapter-cables.
Building a serial DMX-chain:
Connect the DMX-output of the first fixture in the DMX-chain with the DMX-input of the next fixture.
Always connect one output with the input of the next fixture until all fixtures are connected.
Caution:
At the last fixture, the DMX-cable has to be terminated with a terminator. Solder 2 a 120
resistor between Signal (–) and Signal (+) into a 3-pin XLR-plug and plug it in the DMX-output of the
last fixture.
Connection with the mains
Connect the device to the mains with the enclosed power supply cable
Manual | Color Designer 18x12W RGBAW+UV
