Squareled BLADE 5, Руководство пользователя

Страница: 5 / 15

3
in an electrically noisy environment, such as in a discotheque, it is
recommended to use a DMX terminator. This helps in preventing
corruption of the digital control signal by electrical noise. The DMX
terminator is simply an XLR
plug with a 120 OHM resistor connected
between pins 2 and 3,which is then plugged into the output XLR
socket of the last fixture in the chain.
Display Menu
Main menu Sub-menu
Address DMX Address Setting
Config.
Channel Mode
Channel 1Ch
Channel 2Ch
Channel 3Ch
Channel 4Ch
Channel 6Ch
Channel 8ChF
Channel 9ChF
Channel 10ChF
Channel 10ChD
Channel 14ChD
Channel 15ChF
Dimmer Curve
Set Curve Mode L
Set Curve Mode Q
Set Curve Mode I
Set Curve Mode S
Cipher Setup 0-999