Manual | Aura Panel gold matrix & dream color
Sound State
Select
Sound State
, press the
ENTER
button to confirm, present mode will blink on the display. Use the
DOWN
and
UP
button to select the
On (sound on)
or
Off (sound off)
mode. Once the mode has been selected, press
the
ENTER
button to setup, to go back to the functions without any change press the
MENU
button again. Hold
and press the
MENU
button about one second or wait for one minute to exit the menu mode.
Sound Sense
Select
Sound Sense
, press the
ENTER
button to confirm, present mode will blink on the display. Use the
DOWN
and
UP
button to change the sound sense from 0 …100.
Once the mode has been selected, press the
ENTER
button to setup, to go back to the functions without any
change press the
MENU
button again. Hold and press the
MENU
button about one second or wait for one minu-
te to exit the menu mode.
Black Out
Select
Slave Mode
, press the
ENTER
button to confirm, present mode will blink on the display. Use the
DOWN
and
UP
button to select the Yes (yes blackout) or No (no blackout) mode.
Once the mode has been selected, press the
ENTER
button to setup, to go back to the functions without any
change press the
MENU
button again. Hold and press the
MENU
button about one second or wait for one minu-
te to exit the menu mode.
Back Light
Select
Back Light
, press the
ENTER
button to confirm, present mode will blink on the display. Use the
DOWN
and UP button to select the
On (Led on)
or
Off (Led off)
mode. Once the mode has been selected, press the
ENTER
button to setup, to go back to the functions without any change press the
MENU
button again. Hold and
press the
MENU
button about one second or wait for one minute.
Auto-Test
Press the
MENU
button up to when the Auto-Test is blinking on the display. Pressing
ENTER
button and the unit
will run self-test by built-in program. To go back to the functions press the
MENU
button again. Hold and press
the
MENU
button about one second or wait for one minute to exit the menu mode.
Load Defaults
Press the
MENU
button to show Load Defaults on the display. Press the
ENTER
button and the display will blink.
Use the
DOWN
and
UP
button to select the Yes (run built-in program to set the fixture to Defaults settings) or No.
Press the
ENTER
button to setup, to go back to the functions without any change press the
MENU
button again.
Hold and press the
MENU
button about one second or wait for one minute to exit the menu mode.
