Manual | Aura Panel gold matrix & dream color
DMX Address
Select
DMX Address
, press the
ENTER
button to confirm, the present address will blink on the display. Use the
UP
and
DOWN
button to adjust the address from 1 to 512.
Once the address has been selected, press the
ENTER
button to setup, to go back to the functions without any
change press the
MENU
button again. Hold and press the
MENU
button about one second or wait for one minu-
te to exit the menu mode.
Channel Mode
Select
Channel Mode
, press the
ENTER
button to confirm, present mode will blink on the display. Use the
DOWN
and
UP
button to select the 4 chan or 7 chan or 13 chan or 48 chan or 43 chan mode.
Once the mode has been selected, press the
ENTER
button to setup, to go back to the functions without any
change press the
MENU
button again. Hold and press the
MENU
button about one second or wait for one
minute to exit the menu mode.
Install Mode
Select
Install Mode
, press the
ENTER
button to confirm, present mode will blink on the display. Use the
DOWN
and UP button to select the 1 * 1 or 1 * 2 or 2 * 2 mode.
Once the mode has been selected, press the
ENTER
button to setup, to go back to the functions without any
change press the
MENU
button again. Hold and press the
MENU
button about one second or wait for one minu-
te to exit the menu mode.
Show Mode
Select
Show Mode
, press the
ENTER
button to confirm, present mode will blink on the display. Use the
DOWN
and
UP
button to select the Show 0 or Show 1 … Show 8 mode.
Once the mode has been selected, press the
ENTER
button to setup, to go back to the functions without any
change press the
MENU
button again. Hold and press the
MENU
button about one second or wait for one minu-
te to exit the menu mode.
Manual Mode
Select
Manual Mode
, press the
ENTER
button to confirm, present mode will blink on the display. Use the
DOWN
and
UP
button to select the number or letter . Once selected number.
Use the
DOWN
and
UP
button to select the 0 or…or 9, If you select letter. Use the
DOWN
and
UP
button to
select the A or…or Z, to go back to the functions without any change press the
MENU
button again. Hold and
press the
MENU
button about one second or wait for one minute to exit the menu mode.