Squareled Aura Bar & Matrix Beam Light 100, Руководство пользователя

Страница: 7 / 14

Manual | Aura Bar & Matrix Beam Light 100
Blackout Mode
Press the
MENU
button up to when the
Blackout Mode
is shown on the display. Pressing the
ENTER
button,
Use the DOWN and UP button to select the yes (blackout) or no (normal).
Once selected, press the
ENTER
button to setup or automatically exit menu mode without any change after
7 seconds. To go back to the functions without any change press the
MENU
button.
Back Light
Select Back Light , press the ENTER button to confirm, present mode will blink on the display. Use the DOWN
and
UP
button to select the
On (Led on)
or
Off (Led off)
mode.
Once the mode has been selected, press the ENTER button to setup, to go back to the functions without any chan-
ge press the MENU button again. Hold and press the MENU button about one second or wait for one minute.
Auto-Test
Press the
MENU
button up to when the
Auto-Test
is blinking on the display. Pressing
ENTER
button and the
unit will run self-test by built-in program. To go back to the functions press the MENU button again. Hold and
press the MENU button about one second or wait for one minute to exit the menu mode.
Fixture Time
Press the
MENU
button up to when the
Fixture Time
is blinking on the display. Pressing
ENTER
button and the
display will show the number of working hours of the unit.
To go back to the functions press the
MENU button again. Hold and press the MENU button about one second or
wait for one minute to exit the menu mode.
Firmware Version
Press the MENU button up to when the Firmware version is blinking on the display. Pressing ENTER button
and the display will show the version of software of the unit.
To go back to the functions press the
MENU
button again. Hold and press the
MENU
button about one second or
wait for one minute to exit the menu mode.