Manual | Aura Bar & Matrix Beam Light 100
4. How to set the unit
4.1 Rear Panel
• 1 - Display:
To show the various
menus and the selected functions
• 3 - Button:
MENU
To select the programming
functions with short press.
DOWN
To go backward in the
selected functions
UP
To go forward in the
selected functions
ENTER
To confirm the selected
functions
• 4 - DMX input:
For DMX512 link, use 3/5-pin XLR plug cable to input DMX signal.
• 5 - DMX output:
For DMX512 link, use 3/5-pin XLR plug cable to link the next unit.
• 6 - POWER input:
Connect to supply mains power.
7 - Microphone:
Receive music for the sound active.
4.2 Main Function
To select any functions, press MENU button until the required one is shown on the display. Select the function by
ENTER button and the display will blink. Use DOWN and UP button to change the mode. Once the required mode
has been selected, press ENTER button to setup or it will automatically return to the main functions without any
change after idling 30 seconds. Back to the functions without any change press MENU button. The main func-
tions are shown below:
DMX Address
1-512
Channel Mode
4CH
5 CH
7CH
24 CH
26CH
28 CH
Содержание Aura Bar & Matrix Beam Light 100
Страница 1: ...SquareLED Aura Bar Matrix Beam Light 100...
