Square Scrub EBG Series
Surface Preparation Machines
Owner’s Manual
Contents
• Introduction
• Manual Conventions
• Safety / Important
• Machine Transport
• Operating Instructions
• Troubleshooting Guide
• Parts Breakdown
• Warranty Information
• Pad Information
About the Square Scrub
Floor Surface Preparation Machine
Square Scrub’s EBG machines are American Made. Our EBG Surface Preparation machines offer
removable weights, a minimum 1.5hp, 1725rpm motor, powder coated 10 gauge steel, heavy
duty frame, and 6”x2” non-marking ball-bearing wheels with a heavy duty ¾” solid steel axle.
Removable weights not only make our machine easy to transport but allow users to tailor the
weight to suit their project needs.
With a selection of over 30 different surface preparation pads, there really is only one machine
for the job. The Square Scrub EBG Surface Preparation Machines are designed to make the most
efficient use of every pad, paper or screen used with the machine, saving both time and MONEY.
Please visit our Web site at
www.squarescrub.com for
informative videos and
literature.
EBG-20/Q
page 1
Introduction
You are now the proud owner of an EBG-Series machine. This machine is a product of Square Scrub
Inc. It is made of fine materials and will give you many years of satisfactory service if maintained
and used according to the guidelines in this owner’s manual.
Please read all Installation, Operation, and Safety Instructions before using this
machine.
This product is for Industrial/Institutional/Commercial Use Only.
WARNING OF POTENTIAL INJURY!
MOVING PARTS! UNPLUG BEFORE SERVICING!
This product contains moving parts. To reduce the risk of injury, unplug before servicing.
General Safety
- This floor-finishing machine shall be grounded while in use to protect the operator from electric
shock. The machine is provided with a three-conductor cord and a three-contact grounding type
attachment plug to fit the proper grounding type receptacle. The green (or green and yellow)
conductor in the cord is the grounding wire. Never connect this wire to anything other than the
grounding pin of the attachment plug.
- This machine is for use on a nominal 120-volt circuit and has a grounding plug that resembles the
plug in figure 1. Make sure that the machine is connected to an outlet having the same
configuration as the plug.
No adapter should be used with this machine.
page 2
figure 1