Square Scrub
EBG-Series Surface Preparation Machine
Owner’s Manual
Contents:
- Introduction to the EBG-Series
- Safety
- Transport of Machine
- Operating Instructions
- Troubleshooting Guide
- Parts Breakdown
- Warranty Information
INTRODUCTION TO THE EBG-Series
You are now the proud owner of an EBG-Series machine. This machine is a product of Square Scrub Inc. It is made
of fine materials and will give you many years of satisfactory service if maintained and used according to the
guidelines in this owner’s manual.
Safety
Danger: Indicates an imminently hazardous situation which, if not avoided, may result in death or serious injury.
Caution: Indicates that machine or property damage could result if instructions are not followed.
Note: Provides helpful information.
Severe bodily injury or death can occur to you or other personnel if warnings found on this machine or in this
owner’s manual are ignored. Read and observe all statements and instructions found on the machine and in the
owner’s manual.
Danger:
Never leave the machine unattended while power cord is connected.
Always wear safety goggles and dust mask when operating this machine.
Never inhale dust created by the use of this machine.
Any modifications to this machine may result in damage to the machine or injury to the operator or others nearby.
Alterations to the machine will also void any and all warranty and liabilities.
Do not operate this machine around fuels, solvents, flammable floor finishes, thinners, wood dust or any
flammable materials. Cigarette lighters, pilot lights, electrical sparks and all other sources of ignition should be
extinguished or avoided.
Work areas should be well ventilated.
Keep the power cord clear of the pad. Always lift the cord over the machine. Do not pull on the power cord in an
attempt to move the machine. This could result in electrocution.
