14
15
English
English
RANGE TEST
Allows to check the quality of the wireless signal between
the camera and the controller. If the icon of the wireless
signal is red, the signal is too weak. Bring closer or move the
controller. If the icon of the wireless signal is green and stays
green for more than 10 seconds, the signal is strong enough
and stable to enable wireless transmission of images to the
controller.
For best results, the antennas of the two devices
must point upwards and their respective height should be
approximately the same.
Note
: The message "Waiting for camera"
appears on the screen of the Blackbox
TM
-D if the
controller is not synchronized with the camera
or if the wrong camera ID is selected.
LIVE VIEW
Allows a live preview of the line of sight of the camera
(1 photo per second is sent to the controller)
.
Press the
"
BACK
"
button to return to the previous menu.
Note:
• This
mode
requires more battery power.
•
The preview can also be on a TV using the "TV-OUT"
port on the side of the controller (see "View" for details).
VIEW
To view recorded photos or videos on TFT 2.4"
viewing screen or on a TV set.
• Viewing with the 2.4" screen:
1.
When "View" mode is selected, choose the name of the
camera that you want to view photos and press "OK."
2.
The last recorded picture automatically appears on the
screen. Press "
" or "
" to view the next or previous.
3.
Press "OK" to view the different options available.
View Date/Time:
To view the date and time printed on the
picture.
Protect:
To protect the photo or video on the
screen.
Erase one:
To erase the photo or the video on the
screen.
Erase All:
To erase all stored photos and videos,
with the exception of protected photos
and videos.
Format:
To format memory card and to erase all,
including protected photos and videos.
Exit:
To return to the viewing screen.
Note:
Press the "
" to enlarge the image on the screen or "
"
to return to the original size. When the photo is enlarged,
press "OK" to allow movement in the image. Then use the
navigation buttons to explore different parts of the image. To
disable the mouvement mode, press "OK" again.
