10
11
English
English
For an activation of 24 hours, the same start and
stop time must be entered (example: 00:00 as
start time and 00:00 as stop time.
These hours
are the basic confi guration of your camera)
Note:
The
hours are recorded over a 24 hours
period. For example, 5pm is 17:00 on the
Spypoint camera (00:00 means midnight).
Delay:
(10s/30s/1m/5m/
15m/30m)
Select the time interval between two photos or
videos.
Note
: A shorter detection delay results in a
shorter battery life.
Multi-shot:
(1/2/3/4/5/6
consecutive shots)
Take up to 6 consecutive shots at each
detection, with a 10 second delay between each
photo. This option allows up to 6 pictures from
different angles when the camera is in “Photo”
mode.
Video length:
(10s/30s/60s/90s)
Allow the user to select the recording duration
when the camera is set in “Video” mode.
Language:
(English/Français/
Deutsch)
Select a language for the camera’s menu.
Date:
Set the date as Month / Day / Year
Time:
Set the time as Hour / Minute
Stamp:
(Yes/No)
Select or cancel imprinting date, time,
temperature and moon phases on photos.
Full moon:
New moon:
First quarter:
Last quarter:
Quality:
(High/Normal/
Low)
Set the photo resolution.
High:
10 MP
Normal:
5 MP
Low:
3 MP
Temperature:
(°C/°F)
Select the temperature display in °F or °C.
Continuous:
(Yes/No)
Allow the user to take pictures or videos even
if the memory card is full. The camera will
continue to record photos or videos by deleting
the first files recorded.
Power:
(Batteries/
Electricity)
Allow the user to select the battery power or the
electricity power.
Choose “Electricity” if the camera is powered
of a main electric supply. (using a 12 volt DC
adapter AD-12V, sold separately). Main electric
supply is recommended for security purposes.
It provides an instant trigger time when a
movement is detected. We recommend that you
remove the AA batteries when this power supply
is used. Although, lithium battery pack can
remain safely inside the camera and it is ideal
in case of a blackout. A 12 volt DC adapter that
can provide a minimum of 800 mA is required
(See “Options” for accessories).
Note:
when using the electricity power, the
“Multi-shot” mode and the “Delay” between
photos are disabled as the camera starts
instantly every time it detects motion. Also,
the imprinting temperature on each picture is
disabled.
