10
11
English
English
DISTANCE
Turn the dial to the right to increase distance.
The
DISTANCE
dial (placed on the side of the camera) can
adjust the sensitivity of the detector.
The camera is equipped
with a detector sensitive to infrared. The system detects only heat
source in motion. The greater the mass of heat, more sensitive is the
system.
Range of detector is between 5 and 50 feet.
The best way
to adjust the distance is to set the camera in
SET/
TEST
mode (see
above).
Make sure to have the least possible objects in front of the
camera during the positioning. This prevents pictures being taken
by the camera when oriented towards the sun while an object moves
in front of the camera (eg. a branch)
SOUND RECORDING
This camera SPYPOINT
®
offers the possibility to record the
sound in VIDEO mode. When the VIDEO mode is selected,
the camera automatically records the sound. On the bottom the
camera, you can find a rubber cap with the inscription MIC. If
the user does not want to record the sound, the rubber cap needs
to stay in place. If the sound recording is required, the user must
lift the rubber cap and turned it slightly so that the microphone
receiver is completely cleared (See figure below).
DOWNLOAD TO A COMPUTER
To transfer or view photos and videos on a PC, you must first
turn the camera OFF and connect the USB cable (supplied)
from the camera to your computer. The computer will recognize
the camera and install the software itself. Click on «My
Computer» and select «Removable Disk». Then click «DCIM»
and «100DSCIM» to find all your photos and videos.
Taking the SD card out of the camera and inserting it into the
computer port will achieve same results. If no SD slot is built
into the computer, a multi-card reader RD25-1 (sold separately)
must be used.
TELEVISION
To see photos and videos directly on a TV screen, turn
OFF
your camera and select VIEW.
Connect the yellow end of the
cable (supplied) into the VIDEO IN of the TV and the other end
into the TV OUT of the camera
. Turn
ON
the camera. You will
see the last picture or video recorded. To change the picture or
the video, use the key UP or DOWN. If you press MENU/OK,
the following options will appear:
View Date/Time:
To view the date and time printed on
the picture.
Erase one:
To erase the photo or the video on the
screen.
Erase All:
To erase all stored photos and videos,
with the exception of protected photos
and videos.
Format:
To format memory card and to erase all
protected photos and videos.
Protect:
To protect the photo or video on the
screen.
Language:
To select language.