Spypoint BF-8, Руководство пользователя, Страница: 5 / 27

8 9
English
English
How to properly install your camera
using the supplied installation strap:
(Recommended installation height: about 3 feet).
DELAY
To select the time interval before the camera records another
photo or video.
Additional setting : it is possible to decrease the delay between
detections to 10 seconds (instead of 1 minute) by using the
following procedure.
Note that the battery life will be
affected.
Turn OFF the camera. Press and hold the « UP » button, turn
the camera on. « 10_S » appears on the screen meaning the
1 minute delay has been replaced by a 10 second delay. To
reset the camera to 1 minute delay, follow the same procedure.
« 1_M » appears on the screen (see figure below).
MULTI-SHOT
To take up to 4 consecutive shots at each detection, with a 10
second delay between each photo. This option is available in
PHOTO mode.
VIDEO LENGTH
Allows you to select the recording duration when the camera is
set in VIDEO mode.
«BUSY »LED
The «BUSY» light, located next to the screen, lights up when
the camera is recording.
SETTINGS
Date, Time, Temperature and Picture Quality
Turn OFF your camera; set switch MODE to SET/TEST and
turn ON the camera. Press MENU/OK. An «H» will flash on
the screen indicating that the camera is in High Resolution
(8 MP). Use the DOWN button if you want to reduce the
resolution to «L» (3 MP). Press MENU/OK » to set the date and
time (
mm/dd/yy, hh/mm ). Use UP and DOWN to change the
blinking digit. Choose «F» or «C» to display the temperature in
Fahrenheit (°F) or Celsius (°C). Press MENU/OK to go to the
next option. Once finished, press MENU/OK and turn OFF the
system to save the changes.
MODE
When the PHOTO or VIDEO mode is selected, the test light in
front of the camera flashes for 60 seconds to allow the user to
leave without being photographed or recorded.
When the SET/TEST mode is selected, no picture or video
is recorded.
Walk perpendicularly in front of the camera.
When
the camera detects movement, the light winks to indicate that
normally, a photo or video would be recorded.
If the system does
not detect the movement, increase the distance detection using the
wheel
DISTANCE or realign the system differently. When you
understand how the device responds to detections, you can better
adjust the direction or the height of the installation.
When the
switch is set to VIEW, you can view the recorded pictures or
videos on television.
10_5
10 sec. delay 1 min. delay
Test light