Spypen zemo, Руководство пользователя

Страница: 13 / 20

13
• Deleting One Picture, Video/Audio Clip
1. Open the LCD panel, then turn on the camera.
2. Set the camera to Playback mode by pressing the Capture/Playback button.
3. Use the Left/Right/Up/Down buttons to select the picture, Video/Audio clip you want to delete.
Press Press Press
• Deleting All Pictures, Video/Audio Clips
1. Open the LCD panel, then turn on the camera.
2. Set the camera to Playback mode by pressing the Capture/Playback button.
Press Press Press
• Formatting the SD Card
IMPORTANT: Formatting the SD card erases all pictures, video and audio clips, including protected files.
Removing the SD card during formatting may damage the card.
Turn on the camera and set the camera to Playback mode.
Press
Press
Press
• Setting TV-out
Setting the Video Output System
The video output signal can be switched (NTSC or PAL) to accommodate different signal systems. For
example: NTSC for USA, Canada, Taiwan, Japan, etc. and PAL for Europe, Asia (excluding Taiwan), etc.
You can change the video output system according to the following steps:
Turn on the camera and set the camera to Playback mode.
Press Press Press
NOTE:
When “NTSC” or “PAL” is selected, the LCD screen turns black. When “LCD” is selected, the
LCD screen will return to Playback mode.
Connecting to a TV
When the camera is connected to a TV and “NTSC” or “PAL” is selected, the LCD screen is not active and
the TV screen now performs as the camera LCD screen.
1. Connect the camera to a TV via the TV-out cable (supplied) as illustrated.
2. Set the TV to “Video” mode.
3. When the camera is set to Capture mode, you can preview
the subjects you want to record on the TV screen.
4. When the camera is set to Playback mode, you can review all
the pictures, video and audio clips stored in the SD card on
the TV.
TV-out cable