1008146 Rev. A
13
ACCUWAY - What It Does
The Accuway Spread Pattern Equalizer Balances the
spread pattern - Bulls Eye - Dead to the Center of the
Spreader.
All products. All spreading conditions.
Skewing is eliminated. Does not change the spread
width.
ACCUWAY - How It Works
Accuway shifts the material placement on the spreader
spinner fan. This in turn, balances the pattern heavier to
the right or heavier to the left.
Spread pattern can be affected by many variables such
as humidity, temperature, wind, spreader condition,
speed of travel, material size and weight. Because of
these variables, the diffuser must be adjusted for each
type of application. Proper adjustment will minimize
skewing and uneven coverage.
Adjustment is very sensitive. Turning the Accuway
Diffuser Knob just a little will result in a drastic change to
the spread pattern.
The Accuway Diffuser Plate has a front and a rear ramp.
Never adjust so that the diffuser plate splits the material
flow to both the front and rear ramp at the same time.
If the spreader is spreading to the left of center, turn
the diffuser knob counterclockwise fully. Then adjust
clockwise until the edge of the diffuser plate centers the
spread.
If the spreader is spreading to the right of center, turn
the diffuser knob clockwise fully. Adjust counterclockwise
until the edge of the diffuse plate centers the spread.
NEVER USE ACCUWAY FRONT AND REAR RAMPS TO
SPLIT THE PRODUCT FLOW. Use only the front side or
the back side. With proper adjustment you should be
able to achieve a balanced spread pattern.
